TeraFlex - JK Tera30 HD Axle Housing

TeraFlex - JK Tera30 HD Axle Housing

JK Front Tera30 Replacement Axle Housing - Right Hand Drive

Description
The TeraFlex Tera30 heavy duty replacement axle housing is the perfect solution for bent, broken or damaged front Dana 30 axles in JK Wrangler vehicles. The Tera30 is an upgrade for Jeep JK owners looking to beef up one of the weak areas of their Jeep. The differential centre section is engineered for extreme use and is constructed with increased rib gussets in a ductile cast iron housing. The smooth radius bottom is designed to glide over rocks & obstacles, and incorporates a bottom oil drain hole for simple fluid changes. By integrating the upper control arm mount in the factory location on the housing unnecessary bracketry is eliminated. By increasing the axle tube diameter to the largest in the industry, the 3.25” OD x 0.25” wall DOM tubing make axle bending and breaking a thing of the past and is no longer a concern. Redesigned forged inner knuckles increase section strength to eliminate ball joint separation. The replacement axle housing assembly includes the Tera30 center section, 3.25” OD tubes, 1/4” Thick CNC laser cut axle brackets with integrated lower bracket skid plates, reinforced front trackbar mount (ties into spring pad) for greater strength, and forged inner knuckles. Pre-installed inner seals and upper control arm bushings make the upgrade seamless. A Premium UV protected triple-stage powder coat process provides superior corrosion resistance. Simply transfer your existing internal components, outer knuckle assembly, and brakes to the new housing! The Tera30 retains all JK ESP, ABS & Speedometer sensor capability. The Tera30 is 100% engineered, designed, and hand assembled in the USA with 100% new components.

Fits right hand drive JK Wranglers with 0-3" or  4+" of lift, and a Dana 30 axle.

Tera30 Housing Features & Benefits

  • Ductile cast iron housing with increased rib gussets
  • Smooth radius bottom design to glide over rocks & obstacles
  • Asymmetric housing design, for extra long tube side strength
  • Bottom oil drain hole for simple fluid changes
  • Integrated factory location upper control arm mount
  • 3.25" x 0.25" axle tube increases strength to resist bending and torsion with minimal weight increase (6.7lbs more than factory tubes, 8.9lbs less than sleeved axle tubes)
  • 100% engineered, designed, and built in the USA
  • 100% new components
  • No Excuses warranty - 1 year, unlimited mileage


Tera30 Assembly Features & Benefits

  • Forged Heavy Duty Inner Knuckles with greater upper and lower section strength
  • 1/4" Thick CNC laser cut axle brackets for extreme strength - Reinforced front trackbar mount (ties into spring pad) for greater strength
  • Integrated lower FlexArm skid plates
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps and lower spring retainers
  • Heavy duty ductile iron differential cover
  • Axles Seals pre-installed
  • Pre-installed upper control arm bushings
  • Retains all JK ESP, ABS & Speedometer sensor capability
  • Proper pinion angle for lifted JK applications
  • Premium UV protected triple-stage powder coat process for superior corrosion resistance

JK RHD 0"-3"
JK RHD 4" with raised pinion angle and trackbar bracket 

 

Write a review

Please login or register to review
  • Views: 3
  • Brand: TeraFlex
  • Product Code: TER-350300x
  • Availability: In Stock
  • AU$2,650.00
  • Ex Tax: AU$2,409.09

Available Options

Tags: JK, Axle

These New Ball Joints are designed to replace the factory ball joint that is prone to premature f..
AU$161.50
Ex Tax: AU$146.82
Take your axle to the absolute highest level of torque capacity with RCV. The same technology emp..
AU$1,603.50
Ex Tax: AU$1,457.73
DESCRIPTIONTeraFlex HD ball joints are engineered to handle the increased load caused by oversized t..
AU$323.50
Ex Tax: AU$294.09
JK High Performance Tera30/44 Front Axle Tube Seal - With 1/4” Wall Tube Description The T..
AU$228.00
Ex Tax: AU$207.27
JK High Flow Angry GrilleMatte Black FinishCan be paintedFactory FitLarge Mesh Insert for increased ..
AU$275.00 AU$120.00
Ex Tax: AU$109.09
Details The TeraFlex JK Hi-Lift RotopaX mount will allow you to carry both a Hi-Lift jack, a..
AU$40.00 AU$26.00
Ex Tax: AU$23.64
Description: Synergy Rear Sway Bar Links Easy installation Uses stock mountin..
AU$124.50
Ex Tax: AU$113.18
Dana Spicer Line Of Upgraded Heavy Duty U-Joints Feature A Superior Forged Body With Improved Sea..
AU$49.50
Ex Tax: AU$45.00
Compatible with 3.0" and taller lifts Heavy duty front track bar bracket for the Jeep J..
AU$190.00
Ex Tax: AU$172.73
This massive heavy duty forged front adjustable trackbar is designed as the ultimate in front end..
AU$326.00
Ex Tax: AU$296.36