Poison Spyder - JK Brawler Lite Front Bumper Black
JK Brawler Lite Front Bumper with Brawler Bar - BLACK SPYDERSHELL ARMOR COAT FINISH
Plate Steel Construction
This bumper is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
The Brawler Bar is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1¾" diameter .120" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. The plate gusset style is offered for strengthening the Brawler Bar and is made of CNC laser-cut brake-formed 3/16" plate steel.
The Brawler Lite can be mounted without cutting or altering the Jeep's frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesn't require frame modifications. The factory "Crash Bar" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Lite comes with built-in, recessed fog lamp mounts that are designed to easily accept your stock fog lamps.
The Brawler Lite's top-mounted, integrated winch mount is part of the fully boxed, internally gusseted bumper shell. Winches that are mounted inside the bumper lose this box strength as well as the strength of internal gussets. The Brawler Lite is designed to accept most Warn and other brand winches that use the popular 10" X 4½" mounting pattern, with a few small exceptions. Warn Powerplant winches fit the Brawler Lite with Brawler Bar and Plate Gussets just fine. Mounting the Warn Zeon winches requires our Zeon Winch Spacer Plates.
Recovery Shackle Tabs
Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1" thick steel billet, specifically designed to accept our heavy duty 3/4" Recovery Shackles.
Poison Spyder's SpyderShell Armor Coat has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance.
The Spydershell Armor Coat Process
- Media Blast - to remove all manufacturing residues, oils, etc., and to prepare the metal surface for maximum adhesion of primer coat
- Seam Seal - 3M Scotch-Weld Epoxy Adhesive to fill any un-welded seams. Powder adheres to the sealant, making sure moisture can not enter these areas and cause rust.
- Coat 1: Zinc Rich Primer - contains the properties for creating the best possible bond with the metal surface, and providing the best substrate for applying the color coat. Zinc rich primer helps deter corrosion. Even where the item has been scratched through to bare metal, it is the primer's job to ensure that moisture and corrosion does not spread from the exposed metal scar, to under the adjacent un-scarred finish. Black primer is used so that any chips or scratches in the top coat due to wear and tear are less noticeable.
- Coat 2: Super-Durable Semi Gloss Smooth Black Color Coat. Architectural grade to withstand years of exposure to sunlight and weather.
Fits 2007+ JK Wranglers
The Brawler Lite comes to you with black spydershell armor coat finish. Optional Brawler Lite Skid also available in black spydershell armor coat finish